Easy Tutu Craft

Tutus are such a multipurpose dress-up because they can be used for a princess costume, a fairy costume or a ballerina costume.  This tutu is fast and easy to make, and it does not require a sewing machine.

You will need:
5 yards of tulle (I used 2.5 yards each of pink and green.)
1 yard 1- 1 1/2 inch wide ribbon
5 yards of 1/4 inch ribbon (optional)

 Take your tulle and lay it out with the folded edge nearest you.  Roll from the folded edge to the opposite edge of the fabric.  Then take the roll and cut every 2-3 inches to make 2-3 inch strips.  For a longer tutu leave the strips at that length.  For the length pictured cut each of the strips on the fold.  Take your 1-1 1/2 inch ribbon and measure it around the waist of the child you are making the tutu for.  Mark the ribbon on each side where they meet on the child's waist and then add enough on either side to tie a bow and cut the ribbon.

You are going to tie the pieces of tulle around the ribbon.  To do this, take a folded piece of tulle (if you cut the tulle then fold the cut piece), just below the folded edge and place it next to the ribbon.  Wrap the rest of the strip around the ribbon and then pull the cut ends through the center of the folded end and pull tight around the ribbon.  Make sure that you are between the 2 marks that you made leaving the rest of the ribbon free to tie.

Alternate your tulle colors as you are tying the strips.  For the tutu pictured I switched colors every 4 strips.

  If you chose to add the 1/4 inch ribbon you will need to cut the ribbon at twice the length of the tutu and fold the ribbon.  Then tie it to the waist ribbon just as you did the tulle strips.  I tied the ribbon every eight strips, so after 4 of each color.


Continue tying until all of the space between the 2 marks is full.  Tie a knot in the waist ribbon at each mark so that the knotted tulle strips do not slip out of place.  Your tutu is finished!  Just tie it in a bow around your child's waist.

Conical Princess Hat Craft

Are you looking for a fun project to do with your princess or a party craft idea?  This project is does not require a sewing machine and is a fun party craft and dress up for your princesses.

You will need:
1 large piece of Card Stock
1/2 yard fabric
3-4 yards of ribbon
and a Glue gun.

 Choose cardstock that is at least 24 inches tall.  Roll the cardstock into a cone shape that fits comfortably on the girls head.  The shape at the bottom will not be even yet.


Take a pencil and mark the spot on the had where the corner will be attached to the wall of the hat.  Then take the pencil and draw an even cutting line from that spot all the way around the bottom of the hat.  Unroll the cardstock and cut around the line.

Lay the cardstock on the fabric of your choice, and cut the fabric about 3/4 inch bigger than the paper all the way around.



Fold the 3/4 inch fabric over the cardstock and glue into place with a hot glue gun.  Pull the fabric tight so that you don't have any wrinkles on the front of your hat.

Take your ribbon and cut it 1 1/2 inches longer than the length you want your streamers to be.  You can also cut long, thin strips of fabric to tie into the streamers as well.  Put all of the ribbon and fabric pieces together and tie a large knot at one end. 

Then roll the hat into the conical shape with the streamers tucked into the small end.  Glue the edge of the hat securely into place.  Take another piece of ribbon and glue it over the seam. Take 2 20 inch pieces of ribbon and tie a knot on one end.  Poke a hole in each side of the hat about 1/2 to 1 inch above the bottom edge and string a ribbon through each side that can tie under the chin.